Search in Category
Square End
Search term required.
Filter Your Search
Decimal Size
Substrate
Flute Length
Overall Length
Performance
Shank Type
Brand
Please note: All items are not yet available for use with our Filtered search.
If an item is not available via the filters, try searching for the specific part # or description.
If an item is not available via the filters, try searching for the specific part # or description.
Product Links
Loading...
Square End Endmills
Viewing Page 1 of 2
(18 results)
RE11164
1 (1.0000) Dia, 4 Flt, SE Square, Carbide Endmill, 1.5000 LOC, AlTiN Coated, 4.0000 OAL, 30° Helix, 1 (1.0000) Dia Round Shank, General Purpose
RedLine Tools Made in the USA
RE12564
1 (1.0000) Dia, 4 Flt, SE Square, Carbide Endmill, 2.2500 LOC, AlTiN Coated, 5.0000 OAL, 30° Helix, 1 (1.0000) Dia Round Shank, General Purpose
RedLine Tools Made in the USA
RE51362
1 (1.0000) Dia, 4 Flt, SE Square, Cobalt Endmill, 2.0000 LOC, AlTiN Coated, 4.5000 OAL, 30° Helix, 1 (1.0000) Dia Weldon Shank, General Purpose
RedLine Tools Made in the USA
RE51762
1-1/8 (1.1250) Dia, 2 Flt, SE Square, Cobalt Endmill, 1.6250 LOC, AlTiN Coated, 4.1250 OAL, 30° Helix, 1 (1.0000) Dia Weldon Shank, General Purpose
RedLine Tools Made in the USA
RE51766
1-1/4 (1.2500) Dia, 2 Flt, SE Square, Cobalt Endmill, 1.6250 LOC, AlTiN Coated, 4.1250 OAL, 30° Helix, 1 (1.0000) Dia Weldon Shank, General Purpose
RedLine Tools Made in the USA
RE12764
1 (1.0000) Dia, 4 Flt, SE Square, Carbide Endmill, 3.0000 LOC, AlTiN Coated, 6.0000 OAL, 30° Helix, 1 (1.0000) Dia Round Shank, General Purpose
RedLine Tools Made in the USA
RE12765
1 (1.0000) Dia, 4 Flt, SE Square, Carbide Endmill, 4.0000 LOC, AlTiN Coated, 7.0000 OAL, 30° Helix, 1 (1.0000) Dia Round Shank, General Purpose
RedLine Tools Made in the USA
RE51758
1 (1.0000) Dia, 2 Flt, SE Square, Cobalt Endmill, 1.6250 LOC, AlTiN Coated, 4.1250 OAL, 30° Helix, 1 (1.0000) Dia Weldon Shank, General Purpose
RedLine Tools Made in the USA